(2) JBL Pro JRX212 12 2000w 8 Ohm PA DJ Speakers+Crown Power Amplifier+Cables Fashion

Description
Package Includes:
- (2) JBL Pro JRX212 12 2000 Watt Professional Passive PA DJ Speakers 8 Ohm JRX 212
- (1) Crown Pro XLi1500 900w 2 Channel DJ PA Power Amplifier Professional Amp XLI 1500
- (2) Rockvile RCSS1610 10 16 AWG Speakon to Speakon Speaker Cable 100% Copper
-
- JBL Pro JRX212 12 1000 Watt 8 Ohm Passive PA DJ
Speaker- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter
edge wound ribbon voice coil- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
- Advanced network topology crossover design
- High-voltage capacitors and inductors with massive cores and heavy gauge wire
- Progressive Transitionâ„¢ high frequency waveguide
- 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
- SonicGuardâ„¢ protects the high frequency driver from excess power without interrupting the performance.
- Non-resonant, all-steel handles
- 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°
- Power Rating : 250 W RMS 1000 W Peak
- Frequency Range (-10 dB) : 60 Hz – 20 kHz
- Frequency Response (±3 dB) : 80 Hz – 18 kHz
- Sensitivity (@1m) : 98 dB SPL (1w 1m)
- Nominal Impedance : 8 ohms
- Recommended Amplifier Power : 250 W to 500 W into 8 ohms
- Maximum SPL : 128 dB
- Nominal Dispersion : 90º x 50º
- Crossover Frequency : 2.1 kHz
- Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
- Weight : 19.5 kg (43 lb)
- High Frequency Driver : JBL 2414H-C 1 exit compression driver mounted on Progressive Transitionâ„¢ Waveguide
- Low Frequency Driver : JBL M112-8
- Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in
- TS phone jack (x1); parallel
- Grille : 18-gauge, powder-coated steel
- Mounting & Suspension : 36 mm, dual-angle pole-mount socket
- Crown Pro XLi1500 900 Watt 2-Channel DJ PA Power
Amplifier- RMS Power @ 4 Ohms: 450 Watts x 2 Channels
- RMS Power @ 8 Ohms: 330 Watts x 2 Channels
- RMS Power @ 8 Ohms Bridged: 900 Watts x 1
- Frequency Response: 20 Hz – 20 kHz
- THD: <0.5%
- Distortion: <0.35%
- Slew Rate: >10V us
- Voltage Gain: 31 dB
- Damping Factor: 8 Ohms, 10 Hz to 400 Hz
- Signal to Noise Ratio (A-Weighted): >100 dB
- Crosstalk: -75 dB, -59 dB
- Input Sensitivity: 0.775V or 1.4V
- Input Impedance: 20k Ohms, 10k Ohms
- AC Voltage: 110-120V~60 Hz
- IEC Power Connector: 15A
- Stereo parallel bridge-mono mode
- User selectable input sensitivity – 0.775V and 1.4V
- Efficient forced-air cooling prevents excessive
thermal buildup- Electronically balanced RCA & XLR inputs; binding
post and Speakon outputs- Two level controls, power switch, power LED, and six
LEDs which indicate signal presence, clip and fault for each channel- Protection against shorts, no-load, on off thumps and
radio-frequency interference- Product Dimensions: 19 x 3.5 12.4 inches
- Product Weight: 28 Lbs.
Authorized Rockville Dealer
Video of RCSS1610:
Description of XLI1500:
Powerful. Reliable.
Affordable.
The XLI Series of power amplifiers from Crown represents a new era in
affordable, quality power amplification. All four models in the series are
powerful, rugged and reliable. They are suited for musicians, DJs, and
entertainers as well as houses of worship, discos, and pubs.Features include RCA and XLR
inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon® and
binding post outputs, stereo parallel bridge-mono mode, power fault signal
presence clip indicators, forced-air cooling; and protection against shorts,
no-load, on off thumps and radio-frequency interference.Features:
Specifications:
Authorized JBL Dealer!
Features of JRX212:
- JBL Pro JRX212 12 1000 Watt 8 Ohm Passive PA DJ
prousbook.shop © 2025 All Rights Reserved
- Image
- SKU
- Rating
- Price
- Stock
- Description
- Weight
- Dimensions
- Additional information
- Add to cart